Men's knitting vests with patterns and descriptions. Men's knitted vests, patterns, knitting, patterns, description, with ornaments, buttons Knitted men's vests and sleeveless vests, knitting patterns

A sleeveless vest should definitely be in a real man's wardrobe. Particular preference is given to strict options, and even if the product is knitted by hand, it is especially valuable to a strong representative of humanity. It will be useful for needlewomen to learn how to knit a men's sleeveless vest using knitting needles; the diagrams and descriptions for them will be very useful in the work.

Model of a men's sleeveless vest with knitting needles with diagrams and descriptions

Any man will like this stylish sleeveless vest. This model is especially interesting, because a sleeveless vest knitted specifically for men will be very practical to wear.

You need yarn and knitting needles. Consider size fifty-two to fifty-four. We start work by knitting the back. Cast on one hundred and ten loops and knit six centimeters with an elastic band one after another. In the next row, add one hundred and twelve stitches. The result was one hundred and twenty-two loops, which knitted according to the pattern:

When forty-nine centimeters have already been knitted, you need to close the loops for the shoulder bevel. First, four loops, and then in every second row you need to decrease three, two and one loop. Having knitted twenty-five centimeters, from the beginning of the bevel we close thirty-four loops along the edges, and the thirty-four central ones that remain must be removed on an additional knitting needle.

The front is knitted similarly to the back, only the neckline will be a toe. For it, at a height of nine centimeters, we remove the two middle loops and decrease both parts seventeen times, one loop in every fourth row. At a height of seventy-four centimeters we close off thirty-four loops for each shoulder.

The knitting is almost finished, all that remains is to assemble the parts of the product.

We make one shoulder seam. Raise all the throat loops onto a knitting needle and knit eight rows with an elastic band. Decrease one stitch at a time from the two center stitches. Close the loops according to the scheme:

Sew along the shoulder seams and also the binding. Along the edges of the bevels, put all the loops on a knitting needle and knit with an elastic band, face to back, for six rows, then close the loops as shown in the figure. So the craftswomen have learned how to knit a basic men's sleeveless vest using knitting needles!

The second version of a brutal sleeveless vest

This version of a sleeveless vest is very conservative and is suitable even for business meetings. It looks neat and unobtrusive.

For this model you need number four knitting needles and acrylic yarn.

The diagram is attached:

Start the product from the back. Cast on one hundred and twenty-three loops and knit six centimeters with an elastic band. Then knitting proceeds according to the pattern, adding eight loops in one purl row. There should be one hundred and thirty-one loops.

Having knitted about forty centimeters, close four loops on each side and decrease three loops every other row, two loops three times, one loop three times. And in this way make decreases until ninety-nine loops remain. Having knitted to a height of sixty-eight centimeters, you need to close twenty-eight loops for the shoulders, and forty-three loops for the throat.

Before knitting it is similar to the back, but after forty-two centimeters are knitted, we knit the toe of the collar. To do this, the middle loop needs to be closed, and in every second row you need to decrease one loop from the toe side twenty-one times. At a height of sixty-eight centimeters, bind off twenty-eight loops for each shoulder.

Important! Before assembly, the product should be slightly moistened with water and wait until it dries.

Sew one shoulder. Raise the loops along the very edge of the neck, mark a corner loop and knit with an elastic band one on one, while decreasing one loop five times in every second row. And so knit ten rows, then close according to the pattern. Now sew the other shoulder. Along the edges of the bevels, pick up all the loops and knit with an elastic band one by one four centimeters, close all the loops. That's all, a great sleeveless vest is ready!

An interesting example of work for beginners in needlework

In some models, needlewomen themselves come up with interesting knitting patterns and then bring them to life.

Our material will present another version of a men's sleeveless vest.

For the back you need one hundred twenty-six loops, knit seven centimeters with an elastic band. Having knitted thirty-five centimeters, we begin to make an armhole, while closing off ten loops: five once, and then in every second row there are three loops, after which only two. Then knit without decreasing. The neck is knitted at a height of sixty-seven centimeters, forty-two loops in the center of the product. After knitting four more rows, close the loops on both sides and finish the back.

A knitted vest for a real man is knitted with a structural pattern. Men's vest knitting diagram and description.

Dimensions: XS/S/M/L/XL
You will need: 300/350/400/450/500 g light gray melange (color 08295) Schachenmayr Bravo yarn (100% acrylic, 150 m/50 g); knitting needles No. 4 and No. 4.5; circular needles No. 4.

Italian set: Using a contrasting thread, loosely cast on half the required number of stitches + 1 stitch, then knit with a working thread.

Remove the contrast thread later.
1st (persons) p.; chrome, *knit 1, 1 yarn over, repeat from *, chrome.
2nd row: chrome, *knit 1 yarn over, remove 1 st as purl, threading before work, repeat from *, chrome.
3rd and 4th row: chrome, *knit 1, 1 stitch, remove as purl... passing the thread before work, repeat from *, chrome.

Elastic band 1/1: alternately knit 1, purl 1.

Structural pattern: knit according to the pattern, repeating 12 stitches of rapport and from the 1st to the 10th p.

Knitting density. Structural pattern, knitting needles No. 4.5: 19 p. and 28 r. - 10 x 10 cm.

Back: on knitting needles No. 4 in the Italian cast-on cast on 41/47/53/59/65 sts - 80/92/104/116/128 sts and knit for the placket with an elastic band of 1/1, in the last r. add 6 p. = 86/98/110/122/134 p.

After 6 cm, switch to needles No. 4.5 and knit between the edges. structural pattern = 7/8/9/10/11 x repeats. After 43 cm from the cast-on edge for the armholes, close on both sides: 1 x 3 sts and in every 2nd p. 1 x 2 p. and 3/4/5/6/7 x 1 p. = 70/80/90/100/110 p.

At a height of 63/64/65/66/67 cm from the cast-on edge for shoulder bevels, close 1 x 2/2/4/4/6 sts on both sides and in every 2nd p. 1 x 2/2/4/4/6 and 4 x 3/3/3/5/5 p.

At the same time, after 65/66/67/68/69 cm from the cast-on edge for the neckline, close the middle 28/30/32/34/36 stitches and knit further separately, closing along the edges of the neckline in every 2nd row. 1 x Z p. and 2 x 1 p.

Front: knit like the back, but with a deeper neckline. To do this, after 57/58/59/60/61 cm from the cast-on edge, close the middle 57/58/59/60/61 stitches and then knit separately, closing along the edges of the cutout in every 2nd row. 2 x 3 p., 1 x 2 p. and 5 x 1 p. Make armholes and shoulder bevels as for the back.

Assembly: sew shoulder seams. For the neckline, cast on 98/102/106/110/112 sts on circular needles along the edge of the neckline and knit 1 round. R. purl p. and 3 cm with an elastic band 1/1, close the loops.

For the armhole strips, cast on 92/96/100/104/108 sts on circular needles along the edges of the armholes, knit 1 purl. R. persons p. and 3 cm with an elastic band 1/1, close the loops.
Sew side seams and armhole strap seams.

Men's sleeveless vest knitting pattern and description

Source magazine Knitting is your hobby. Supplement to magazine No. 5 2017 "Sleeveless vests and vests"

There are many models of men's sweaters that are very easy and simple to knit. Although knitting a sweater is a lot of work, it will not only always keep you warm during the cold winter season, but will also become the main decoration of your wardrobe.

option 1

This option is very good because it is easy and simple to knit. There is a simple pattern here, and you can also choose absolutely any thread for knitting this product.

option 2

This version has a rather complex pattern, but interesting. This type of vest is also ideal if you combine a men’s vest with a shirt, turtleneck and even a sweater. You can use any thread for knitting. Also, the model will look good in any color shades.

option 3

Quite a stylish type of vest that can be worn with a tie or even a bow tie. It is impossible to freeze in such a vest, since it is knitted from thick wool yarn. In this option, you can choose any color; a drawing in any color will look beautiful and original.

option 4

This vest has an original pattern that is very easy to knit. You can use any thread for knitting this vest, but preferably not too thin; Turkish types of threads, such as Yarnart or Gazal, are perfect.

option 5

A great option for a vest with buttons that will go with any outfit. The only thing is that knitting will be a little difficult for beginners, since the pattern is complex. But when knitting, you can use any other pattern, not necessarily this one, or just knit with stockinette stitch, which will also look quite attractive.

Men's knitted vest with knitting needles diagram with description

We offer a simple but interesting version of a knitted vest, which is very easy and simple to knit. The vest has a beautiful pattern that is also quite easy to knit.

To knit this vest model you will need:

— 7 skeins of thread (in this version we used Gazal baby coton thread, 50 g);

- circular knitting needles % 3.5 by 180 cm.

This vest is knitted in the round. In this version, you do not need to knit the back and front parts separately; everything is knitted together in the round. There will be a pattern on the front side, on the back we will knit in stockinette stitch. Vest size 43-45.

Drawing diagram.

Only the even rows (2, 4, 6, etc.) are not indicated in the diagram, since they are repeated. You should knit the first row as in the diagram, and repeat the second row according to the drawing, and so on. The pattern is very easy to knit. Where marked with dots, these are purl loops, where there are no dots, these are knit stitches.

Step-by-step instruction:

We put 296 loops on the knitting needles and close them into a circle.
We knit with a 2x2 elastic band (4 loops). We knit 4-5 cm.
We distribute the cast-on loops across the floors. The back part is 148 loops, the front part is 136 loops. Leave 6 loops on each side. Half of the loops will be the back, we knit the back with facial loops, the second half will be the front part, we knit according to the pattern.
The width along the elastic will be 42 cm, where the pattern will be 53 cm. The girth will be 106 cm.
When we have knitted the elastic, we begin to knit the front part of the vest according to the pattern, and we also knit the back in a circle with facial loops.
The pattern report consists of seventeen loops. For beginners, it is recommended to wear a marker at the end of each report in order to make fewer errors and know when the report has ended.
We knit 38 centimeters like this. You may need to knit more in height, it all depends on your height. When 38 cm is knitted, it is best to take measurements.

Then we begin to decrease and form the armhole.

We set aside twenty loops that we will close for the armhole. For convenience, to know how many loops are closed and how many need to be closed, you can hang a marker. To do this, in the very first row on the front side we decrease five loops, after which we knit according to the pattern. When we knit to the end, turn the knitting over and close five more loops on the reverse side. This is how we knit in reverse rows.
In the second row we close - 3 loops, in the third again - 3 loops, in all remaining rows we close one loop each.
We don’t touch anything on the back side, leave it alone for now and work only with the front part of the vest.
Once the armhole is ready, we begin to form the neckline. In this vest it is V-shaped. You can also use the neck option in a circle.
In this example, the neck height is 19-20 cm. 10 cm x 36 rows. We make up the proportion: 19 * 36 / 10 and get 68 rows. 68/20 and we get that in each row you should decrease 3 loops in every 8th row. We do the decrease with reverse-turning rows of 69 rows.
Starting from the 62nd row to the 69th row, we begin to decrease 8 loops.
On the 70th row we bind off the remaining loops.
When the neckline is ready, continue knitting the back part in stockinette stitch.
We place the working canvas on the left side. And we begin to form armholes according to the indicated pattern. The armhole is formed in the same way as on the front face.

1) -5	2) — 3	3) — 3	4) -2
5) — 2	6) -2	7) -1	8) — 1
9) -2	10) -2	11) -1	12) -1
13) -1	14) -1	15) -1	16) -1
17) -1	18) -2	19) -2	20) -2
21) -1	22) -1	23) -1	24) -1

We form an armhole from the left and right. Decrease occurs in 26 rows:
We start decreasing the neckline from the back. The decrease occurs in the same way as on the front of the vest. We knit straight up to the 60th row, make a cutout and continue to decrease until the 69th row. The shoulder should be at an angle.

We make such reductions in this way:

61) – 30; 62) From the wrong side - 8, after closed loops we close 3 loops; and in the next rows the loops are closed in the same order 63) – 8, – 3. 64) – 8, -3; 65) – 8, -1 66) – 8, -1; 67)- 8; – 1 68) – 10, 16; 9)- 10.

We process the shoulder seams and sew them together.
We process the armhole. We cast on the sleeves - 160 loops. There are 124 loops for the neck. And we knit with an elastic band 2 x 2. We do this with the sleeves and neckline. We knit 7 rows with an elastic band.
Close the loops, hide the ends and the product is ready!

Neck treatment in a men's knitted vest

V-shaped neck processing

Before forming the neck, you should initially select the desired height for the neck. This could be a deep V-shaped neckline or closing the neck loops in a circle. In such cases, they apply the finished product to another item, for example, to a T-shirt, and use it to measure at what distance the neckline will begin.

Initially, you need to finish the left side of the work. To do this, in every third row, the 2nd and 3rd loops should be knitted with pulling.
On the right side, knit the last two stitches together for the bevel.
To form the strip, the edge is cast on and the loops for the binding also begin to be cast on the left side.

round neck processing

To knit a round neck, it is important that all its edges are smooth and round.
After the knitted parts have been processed, it is necessary to cast on the knitting needles the loops corresponding to the length of the neckline. You can cast on through one loop, not necessarily in a row (there will be no holes).
You should knit with an elastic band of 2 x 2 approximately 7 cm. The number of loops should be a multiple of 4.
After knitting, close the loops and hide the thread.